Durable Epoxy Floors in Alexandria VA

Before we apply any epoxy or polyaspartic coating, we focus on proper concrete preparation—because prep is what determines how well the floor bonds and how long it lasts.

Here’s what our process typically looks like:

• Inspect the slab: We check for cracks, spalling, oil/grease stains, old sealers/paint, and any signs of moisture issues.

• Test for moisture: We always install a moisture barrier to help prevent bubbling or flaking. We still test the slab to confirm whether an additional moisture-mitigation coat is needed for your specific concrete.

• Clear and protect the space: We move or mask items as needed and protect walls, door tracks, and adjacent areas.

• Mechanical grinding (not acid etching): We diamond-grind the concrete to create the right surface profile (a light “sandpaper” texture) so the coating can chemically and mechanically bond.

• Repair cracks and pits: We fill cracks, divots, and surface damage with professional repair materials, then grind them flush for a smooth, uniform base.

• Deep clean and dust control: We vacuum thoroughly with commercial equipment and remove fine dust so nothing interferes with adhesion.

• Prime and coat: Once the concrete is clean, dry, and properly profiled, we apply the primer/base coat and build the system (broadcast flakes if chosen, then a durable topcoat).

Bottom line: Great-looking floors start with great prep. Skipping steps (or relying on a quick acid wash) is one of the biggest reasons coatings fail—so we treat surface prep as the most important part of the job.